Product Specifications

Features 3 built-in speaker switches for increased flexibility.

Defeatable high-pass filter jumpers on Sonance BBE SAT module (-3dB at 27Hz) protect in-wall volume controls.

Control voltage can trigger BBE effect on/off and change effect amount.

BBE status LED's

Line-level ouputs for daisy-chaining multiple amplifiers.

Tamper-resistant, recessed power swtich prevents accidental turnoff.

Recessed input level and auto-on sensitivity controls.

Auto-on dip switch for turn-on delay (2, 4, 6, 8, or 12 seconds)

Ground lift switch

High current amp topology can operate at 2.66 ohms.

Defeatable auto-on signal sensing.

Active current limit, short-circuit and speaker protection.

Signal preset LED's - protect/clipping LED's for level setup.

Auto-resetting thermal protection shutoff

In-rush current-limiting circuit.

Specifications:

Power Output both channels driven: 75W RMS per channel @ 8ohms; 135W RMS per channel @4ohms; 175W per channel @2.7ohms.

Bridged Power (20Hz - 20kHz): 250W RMS @ 8ohms.

Bridged Midband Power (1kHz): 270W RMS @ 8 ohms.

Total Harmonic Distortion: <0.05% (20Hz-20kHz @ 8 ohms) <1.0% (20Hz-20kHz @ 4 ohms) <0.2% (20Hz-20kHz @ 2.7 ohms)

Signal-to-Noise Ratio: 100dB below rated output (A-weighted)

Input Sensitivity: 700mv for 75 watts @ 8ohms.

BBE Effect: +9dB, +6dB, Off

Power Consumption: 800 Watts (675VA) at full output

Heat Output: 1330 BTU/HR (at full power)

Dimensions (WxHxD): 16-3/4" x 3-7/8" x 15-1/4" (425mm x 98mm x 387mm)